kamlesh wrote:Hi,
I am facing a problem
When Ever I try to run the sampe application I recieve an error called Neurotec module not registred.
The below error I recieve
---------------------------
VeriFinger 6.0 Sample - Initializing...
---------------------------
Error starting capturing on scanner Futronic#0: One of Neurotec modules is not registered. Code: -200
---------------------------
OK
---------------------------
rakesh1988 wrote:even after doing this i am not able to activate the SDK.. pls give steps on how to get the result..
pls help me![]()
MajuKumar wrote:Hi experts..
Today morning only I installed the Trial Version of Verilook Standard SDK.. But from afternoon its not working..
Getting message "Licenses for extractor and/or matcher could not be obtained"..
I have a constant Internet connection and can able to ping to the IP "69.94.73.28"..
My firewall is also OFF..
And in the ActivationWizardDotNet, it shows Time left for Trial Products is EXPIRED for both Extractor and Matcher.. But today Morning only I installed the product and I hope I can use the SDK for 30 days..
Please help..
Thanks in advance..
Maju..
randoom wrote:Hi I have folloving error with using USB Key with VeryLook :
{"IO error in one of Neurotec modules. Code: -14"}
How can I solve this problem?
Martynas wrote:Hi,
error -14 ussually points to not running pg (licensing service). Check if the licensing service is running.
randoom wrote:How can I check it?
Should I install additional software ?
Martynas wrote:Hi,
find Neurotechnology in Windows services and check if it is started. If it is not started then start it.
cameronhague wrote:Hello,
I am trying to write a Proof of Use project using the Free Fingerprint Verification SDK and I also get this error.
On checking the services, the Neurotechnology service is running, however I notice that it is pointing to the Trial version of the SDK.
I don't particulalry want to uninstall the Trial SDk yet as I'm comparing the two systems for our product.
What do I need to do to get the Free SDK to load the dll's?
Many thanks in advance.
Cameron
leknsandeep wrote:Hi,
Activation of the trial version was done through proxy server.
Following were the steps followed for activation :
> Proxy settings were done through ActivationWizardDotNet and restarted the service.
> executed pg.exe -install in command prompt.
> "Service registered" appeared in command prompt.
While running VeriLook samples other than the one written in C++,error is generated saying that " some components aren't installed".
In C++ sample,even thgough the application opens up ,log says "Failed to obtain licenses for extractor and/or matcher! ".
This might be due to some problems with my activation process .
Could anyone help![]()
Thanks!!!
olayaida wrote:Hi,
I have downloaded and tried the vlook demo executable under windows and we have a real interest to your SDK, especially face detection modules.
I am trying now to use the linux SDK in order to test verilook Face SDK within our existing software.
I am surprised that the trial needs permanent http connection to your servers, that (in addition) has to be Direct without any proxy (even "http standard").
(I am now experciencing "NleDetectFace failed (code ~200)" error)
Our network security policies strictly forbid such connections and I beleive this is the case of many compagnies (at least, I think most of them are not able to provide a public IP to each developper).
1. Is it possible to have an SDK (especially Face Detection) with another activation method ?
2. Do you use the same policy for commercial licences ? In other words, if I buy the SDK, do I need to provide only "Direct Internet" products ?
many thanks,
Best regards
Ouss
Mode = server
TrialProxyServer = proxy_server_address
TrialProxyPort = proxy_server_port
AlexKilpatrick wrote:I have been having intermittent problems where I some of my calls to Megamatcher functions are failing with "module not registered"
I am calling NLicense.Obtain on my inner loop, about once every 5 seconds. I can process 100 records or more before this happens.
Is there any guideline on how often you need to call NLicense.Obtain?
>> License acquiring
IList<string> licenses = new List<string>(new string[] { Licenses.FacesExtractor, Licenses.FacesMatcher });
double score = matcher.Verify(refTemplate.Save(), candTemplate.Save(), out md);
============ General Information ============
OS Version: Microsoft Windows Server 2003 Standard Edition. Version 5.2 (Build 3790). Service Pack 1
System PATH variable: C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft BizTalk Server 2006\;C:\Program Files\Microsoft BizTalk Server 2006\EDI\Subsystem\;C:\Program Files\Neurotechnology\MegaMatcher 3.0\bin\Win32_x86;C:\Program Files\Neurotechnology\MegaMatcher 3.0\bin\Win32_x86\Cmm;C:\Program Files\Neurotechnology\MegaMatcher 3.0\bin\Win32_x86\FPSmm
Processor information:
Number of processors: 1
1 processor information:
Name: Genuine Intel(R) CPU T2400 @ 1.83GHz
Max speed: 1832 Mhz
Architecture: x86
Memory information:
Size 1: 1073741824 (1024 Mb)
Total size: 1024 Mb
ActivationWizardDotNetTrial location: C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\Activation\
==============================================
============ Running license managers ============
Running licensing services:
Location: C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\Activation\pg.exe
Created: 7/14/2009 10:49:22 PM
Company: Neurotechnology
Version: 1. 1. 0. 44326
Description: Neurotechnology activation service (Trial) 1.1
Copyright: Copyright (C) 2005-2009 Neurotechnology
Configuration file (pgd.conf):
Mode = server
Licensing service log file (pgd.log):
2009-08-03 16:17:32 Starting PG (revision: 44326, mode: server, trial)
2009-08-03 16:17:32 PG started.
===================================================
============ IP information ============
Current IP addresses available on this computer:
192.168.0.151
Internet reported IP address:
119.152.64.116
=========================================
============ Firewall information ============
Firewall status:
-------------------------------------------------------------------
Profile = Standard
Operational mode = Enable
Exception mode = Enable
Multicast/broadcast response mode = Enable
Notification mode = Enable
Group policy version = None
Remote admin mode = Disable
Ports currently open on all network interfaces:
Port Protocol Version Program
-------------------------------------------------------------------
1033 TCP IPv4 C:\WINDOWS\system32\mqsvc.exe
1032 UDP IPv4 C:\WINDOWS\system32\mqsvc.exe
2103 TCP IPv4 C:\WINDOWS\system32\mqsvc.exe
2105 TCP IPv4 C:\WINDOWS\system32\mqsvc.exe
2107 TCP IPv4 C:\WINDOWS\system32\mqsvc.exe
135 TCP IPv4 C:\WINDOWS\system32\lsass.exe
24932 TCP IPv4 C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\NServer\NServer.exe
3527 UDP IPv4 C:\WINDOWS\system32\mqsvc.exe
27247 TCP IPv4 C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\NServer\NServer.exe
1801 TCP IPv4 C:\WINDOWS\system32\mqsvc.exe
25452 TCP IPv4 C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\NServer\NServer.exe
===============================================
============ Installed runtimes ============
Installed runtimes:
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700
=============================================
============ NLicensing.cfg Information ============
NLicenses.cfg file information:
Path: C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\Activation\..\NLicenses.cfg
Original content:
Address = /local
Port = 5000
FingersExtractor = SingleComputerLicense:MegaMatcherClient
FacesExtractor = SingleComputerLicense:MegaMatcherClient
IrisesExtractor = SingleComputerLicense:VEExtractor
FingersMatcher = SingleComputerLicense:MegaMatcherClient
FacesMatcher = SingleComputerLicense:MegaMatcherClient
IrisesMatcher = SingleComputerLicense:VEMatcher
FingersBSS = SingleComputerLicense:MegaMatcherClient
FacesBSS = SingleComputerLicense:MegaMatcherClient
IrisesBSS = SingleComputerLicense:MegaMatcherClient
BioAPI = SingleComputerLicense:MegaMatcherClient
ProductLicense = SingleComputerLicense:MegaMatcherClient,SingleComputerLicense:MegaMatcherServer,SingleComputerLicense:MegaMatcherClusterServer,SingleComputerLicense:MegaMatcherClusterNode,SingleComputerLicense:VEExtractor,SingleComputerLicense:VEMatcher
Parsed content:
Address = /local
Port = 5000
ProductLicense = SingleComputerLicense:MegaMatcherClient,SingleComputerLicense:MegaMatcherServer,SingleComputerLicense:MegaMatcherClusterServer,SingleComputerLicense:MegaMatcherClusterNode,SingleComputerLicense:VEExtractor,SingleComputerLicense:VEMatcher
=====================================================
============ Trial Information ============
Proxy trial server test:
Welcome!
Your IP: 119.152.64.116
Time: 1249303527
Stamp: C032F19D
Trial server test: Welcome!
Your IP: 119.152.64.116
Time: 1249303527
Stamp: C032F19D
Trial server (sockets) test: Welcome!
Your IP: 119.152.64.116
Time: 1249303528
Stamp: C032F19D
Trial time left through proxy: Time left for trial products:
MegaMatcherClient: about 4 week(s)
MegaMatcherServer: about 4 week(s)
MegaMatcherClusterServer: about 4 week(s)
MegaMatcherClusterNode: about 4 week(s)
VEExtractor: about 4 week(s)
VEMatcher: about 4 week(s)
Trial time left: MegaMatcherClient: about 4 week(s)
MegaMatcherServer: about 4 week(s)
MegaMatcherClusterServer: about 4 week(s)
MegaMatcherClusterNode: about 4 week(s)
VEExtractor: about 4 week(s)
VEMatcher: about 4 week(s)
============================================
============ Product registration ============
Component info:
Microsoft .NET Framework: Ver 2.0.50727.42
ActivationWizardDotNetTrial version: Ver 3.0.0.44326, Created: 2009-07-15 10:33:32
License obtain cycle:
Started obtain: 8/3/2009 4:56:21 PM
License for SingleComputerLicense:MegaMatcherClient is obtained: True
License for SingleComputerLicense:MegaMatcherServer is obtained: True
License for SingleComputerLicense:MegaMatcherClusterServer is obtained: True
License for SingleComputerLicense:MegaMatcherClusterNode is obtained: True
License for SingleComputerLicense:VEExtractor is obtained: True
License for SingleComputerLicense:VEMatcher is obtained: True
Finished obtain: 8/3/2009 4:57:00 PM
Component information for: C:\Documents and Settings\Administrator\Desktop\MegaMatcher_3_0_Extended_SDK_Trial\MM30ExtendedTrial\bin\Win32_x86\Activation\
Neurotechnology Core 3.0: Ver 3.0.0.0, Managed: False, Created: 7/30/2009 12:57:35 PM
Neurotechnology Licensing 2.0: Ver 2.0.0.0, Managed: False, Created: 7/30/2009 12:57:35 PM
Neurotechnology License Manager 2.0: Ver 2.0.1.0, Managed: False, Created: 7/30/2009 12:57:35 PM
Neurotec.dll, Managed: True
Neurotec.LicenseManager.dll, Managed: True
Neurotec.Licensing.dll, Managed: True
ActivationWizardDotNet.log
ActivationWizardDotNetTrial.exe
ActivationWizardDotNetTrial.Settings.xml
pg.exe
pg000.dmp
pgd.conf
===============================================
============ FPSmm Information ============
FPScannerManCom: FPSmm folder not found. (not installed)
FPSmm folder near Activation folder:
Contents of additional folder:
FPSmmAuthenTec2501.dll
FPSmmNitgen.dll
FPSmmSecuGenHFDU02.dll
FPSmmSecuGenHFDU03.dll
FPSmmSecuGenHFDU04.dll
FPSmmTSTBIRD.dll
ATSC63.dll
BVLSAPI.dll
BVLSInfo.ini
CaptureSDK.dll
CertisExports.dll
cmtfinger.dll
DaktyImage.dll
DermalogCalibrateSDK.dll
DermalogLoggingFacility.dll
DermalogPLS1.cfg
DermalogPLS1.dll
DermalogVC3.dll
FingerChip.dll
FingerPrinterDll.dll
fm200api.dll
fm200drv.dll
fpd.dll
fpdusb.dll
FPSmmAtmel.dll
FPSmmAuthentec.dll
FPSmmBiometrika.dll
FPSmmCertis.dll
FPSmmCrossMatch.dll
FPSmmCyte.dll
FPSmmDactyScan.dll
FPSmmDaktyFpd.dll
FPSmmDermalogZF1.dll
FPSmmDigent.dll
FPSmmFM200.dll
FPSmmFujitsu.dll
FPSmmFutronic.dll
FPSmmFutronicEthernetFam.dll
FPSmmHongda.dll
FPSmmIdentixR.dll
FPSmmJstac.dll
FPSmmLighTunning.dll
FPSmmLScanEssentials.dll
FPSmmLumidigm.dll
FPSmmSuprema.dll
FPSmmSupremaSFR300R.dll
FPSmmTacoma.dll
FPSmmUareU.dll
FPSmmUpek.dll
FPSmmZKSensor6000.dll
FSM26U.dll
ftrScanAPI.dll
futronic.cfg
fx3.dll
fx3scan.dll
GetImageC500.dll
Id3BiokeyDll.dll
Itf32_2080U2.dll
IZZIX.dll
libusb0.dll
LS1394.dll
LScanEssentials.dll
LScanEssentials.ini
LS_DeviceMonitor.dll
LS_USB_Stub.dll
LS_USB_Stub_100.dll
LS_USB_Stub_Us.dll
LumiAPI.dll
LumiCore.dll
MSVCP71.DLL
NBioBSP.dll
Segmentation.dll
SmzCmos1.dll
SMZ_API.dll
TSTBasic.dll
UFScannerC.dll
WisCmos2.dll
WIS_API.dll
ZFScanAPI.dll
Directories in FPSmm folder:
Additional
plugin
SPM
============================================
============ Log Information ============
2009-07-30 13:33:31 – Diagnostics generation started.
2009-07-30 13:34:06 – Diagnostics was generated.
2009-07-30 13:45:36 – Diagnostics generation started.
2009-07-30 13:46:01 – Diagnostics was generated.
2009-07-30 15:51:05 – Diagnostics generation started.
2009-07-30 15:51:41 – Diagnostics was generated.
2009-08-03 10:09:02 – Diagnostics generation started.
2009-08-03 10:09:50 – Diagnostics was generated.
2009-08-03 10:20:57 – Diagnostics generation started.
2009-08-03 10:23:10 – Diagnostics was generated.
2009-08-03 10:32:14 – Diagnostics generation started.
2009-08-03 15:59:26 – Diagnostics generation started.
2009-08-03 16:00:59 – Diagnostics was generated.
2009-08-03 16:09:00 – Diagnostics generation started.
2009-08-03 16:09:34 – Diagnostics was generated.
2009-08-03 16:10:34 – Text copied. Please email this text to Neurotechnology or your distributor.
2009-08-03 16:56:16 – Diagnostics generation started.
2009-08-03 16:57:04 – Diagnostics was generated.
==========================================
kamlesh wrote:Hi,
I am facing a problem
When Ever I try to run the sampe application I recieve an error called Neurotec module not registred.
narva8916 wrote:kamlesh wrote:Hi,
I am facing a problem
When Ever I try to run the sampe application I recieve an error called Neurotec module not registred.
I got the same problem, i got a dongle license and i can't see how to work a sdk's sample,
¿What can i do?, it's the same error
effkay wrote:I get following exception.
Neurotec.NotActivatedException: One of Neurotec modules is not activated. Code: -200\r\n at Neurotec.NResult.RaiseError(Int32 error)\r\n at Neurotec.NResult.Check(Int32 result)\r\n at Neurotec.Biometrics.NMatcher.Verify(IntPtr template1, Int32 template1Size, IntPtr template2, Int32 template2Size, NMMatchDetails& matchDetails)\r\n at Neurotec.Biometrics.NMatcher.Verify(Byte[] template1, Byte[] template2, NMMatchDetails& matchDetails)\r\n at HOOFMAN.Form1.button1_Click(Object sender, EventArgs e)
Can you please help to sort out this issue?
ActivationWizard is running, apparently fine, and following are the diagnostics: ...
narva8916 wrote:i got the verifinger add-on, i want my application support wsq format, but first i want to try with the trial version, but i don't know how to install and activate this add-on please help me
bool available = NLicense.Obtain(Licenses.LicenseServer, Licenses.LicensePort, licenses[i]);
Povilas wrote:narva8916 wrote:i got the verifinger add-on, i want my application support wsq format, but first i want to try with the trial version, but i don't know how to install and activate this add-on please help me
BSS add-on trial version for VeriFinger 6.1 SDK is available for download. It will require standard or extended version of VeriFinger 6.1 SDK installed. For installation: just copy content of zip archive on top of already installed VF 6.1 trail.
BSS add-on trial version for VeriFinger 6.0 and earlier VeriFinger versions is not available.
============ General Information ============
OS Version: Microsoft Windows XP Professional. Version 5.1 (Build 2600). Service Pack 3
System PATH variable: E:\app\oracle\product\10.2.0\server\bin;C:\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Archivos de programa\Microsoft SQL Server\90\Tools\binn;C:\Archivos de programa\Microsoft SQL Server\100\Tools\Binn;C:\Archivos de programa\Microsoft SQL Server\100\DTS\Binn;C:\Archivos de programa\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE;C:\Archivos de programa\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin;C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86;C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86\FPSmm;C:\Archivos de programa\Neurotechnologija\VeriFinger 5.0\bin;C:\Archivos de programa\Neurotechnologija\VeriFinger 5.0\bin\FPSmm;C:\Archivos de programa\Neurotechnology\VeriFinger 6.0\bin;C:\Archivos de programa\Neurotechnology\VeriFinger 6.0\bin\FPSmm;C:\Archivos de programa\Archivos comunes\Nero\Lib\
Processor information:
Number of processors: 1
Number of logical processors: 2
1 processor information:
Name: Intel(R) Pentium(R) 4 CPU 2.80GHz
Max speed: 2800 Mhz
Architecture: x86
Cores: 1
Hyperthreading enabled(2)
Memory information:
Size 1: 268435456 (256 Mb)
Size 2: 1073741824 (1024 Mb)
Size 3: 268435456 (256 Mb)
Size 4: 268435456 (256 Mb)
Total size: 1792 Mb
ActivationWizardDotNetTrial location: C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86\Activation\
==============================================
============ Running license managers ============
Running licensing services:
Location: C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86\Activation\pg.exe
Created: 21/07/2009 05:43:56 a.m.
Company: Neurotechnology
Version: 1. 1. 0. 44398
Description: Neurotechnology activation service (Trial) 1.1
Copyright: Copyright (C) 2005-2009 Neurotechnology
Configuration file (pgd.conf):
Mode = server
Licensing service log file (pgd.log):
2009-08-25 10:15:10 Starting PG (revision: 44398, mode: server, trial)
2009-08-25 10:15:10 PG started.
===================================================
============ IP information ============
Current IP addresses available on this computer:
190.102.210.159
Internet reported IP address:
190.102.210.159
=========================================
============ Firewall information ============
Estado del servidor de seguridad:
-------------------------------------------------------------------
Perfil = Est ndar
Modo funcional = Habilitar
Modo de excepci¢n = Habilitar
Modo de resp. difusi¢n/multidifusi¢n = Habilitar
Modo de notificaci¢n = Habilitar
Versi¢n de directiva de grupo = Ninguno
Modo de administraci¢n remota = Deshabilitar
Puertos actualmente abiertos en todas las interfaces de red:
Puerto Protocolo Versi¢n Programa
-------------------------------------------------------------------
26675 TCP IPv4 (null)
137 UDP IPv4 (null)
139 TCP IPv4 (null)
138 UDP IPv4 (null)
3389 TCP IPv4 (null)
445 TCP IPv4 (null)
990 TCP IPv4 C:\Archivos de programa\Microsoft ActiveSync\rapimgr.exe
===============================================
============ Installed runtimes ============
Installed runtimes:
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1433_x-ww_5cf844d2
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.163_x-ww_681e29fb
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1801_x-ww_5eed8217
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.1833_x-ww_5ef082d6
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.3053_x-ww_b80fa8ca
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.42_x-ww_0de06acd
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700
x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.91_x-ww_0de56c07
=============================================
============ NLicensing.cfg Information ============
NLicenses.cfg file information:
Path: C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86\Activation\..\NLicenses.cfg
Original content:
Address = /local
Port = 5000
FingersExtractor = SingleComputerLicense:VFExtractor
FingersMatcher = SingleComputerLicense:VFMatcher
FingersBSS = SingleComputerLicense:VFBSS
BioAPI = SingleComputerLicense:VFBSS
ProductLicense = SingleComputerLicense:VFExtractor,SingleComputerLicense:VFMatcher,SingleComputerLicense:VFExtended,SingleComputerLicense:VFBSS
Parsed content:
Address = /local
Port = 5000
ProductLicense = SingleComputerLicense:VFExtractor,SingleComputerLicense:VFMatcher,SingleComputerLicense:VFExtended,SingleComputerLicense:VFBSS
=====================================================
============ Trial Information ============
Proxy trial server test:
Welcome!
Your IP: 190.102.210.159
Time: 1251214201
Stamp: FCA61648
Trial server test: Welcome!
Your IP: 190.102.210.159
Time: 1251214202
Stamp: FCA61648
Trial server (sockets) test: Welcome!
Your IP: 190.102.210.159
Time: 1251214204
Stamp: FCA61648
Trial time left through proxy: Time left for trial products:
VFBSS: about 3 week(s)
VFExtractor: about 3 week(s)
VFMatcher: about 3 week(s)
VFExtended: about 4 week(s)
Trial time left: VFBSS: about 3 week(s)
VFExtractor: about 3 week(s)
VFMatcher: about 3 week(s)
VFExtended: about 4 week(s)
============================================
============ Product registration ============
Component info:
Microsoft .NET Framework: Ver 2.0.50727.3053
ActivationWizardDotNetTrial version: Ver 3.0.0.44398, Created: 2009-07-21 05:43:54
License obtain cycle:
Started obtain: 25/08/2009 10:37:11 a.m.
License for SingleComputerLicense:VFExtractor is obtained: True
License for SingleComputerLicense:VFMatcher is obtained: True
License for SingleComputerLicense:VFExtended is obtained: True
License for SingleComputerLicense:VFBSS is obtained: True
Finished obtain: 25/08/2009 10:38:23 a.m.
Component information for: C:\Archivos de programa\Neurotechnology\VeriFinger 6.1\bin\Win32_x86\Activation\
Neurotechnology Core 3.0: Ver 3.0.0.0, Managed: False, Created: 25/08/2009 09:02:14 a.m.
Neurotechnology Licensing 2.0: Ver 2.0.0.0, Managed: False, Created: 25/08/2009 09:02:14 a.m.
Neurotechnology License Manager 2.0: Ver 2.0.1.0, Managed: False, Created: 25/08/2009 09:02:14 a.m.
Neurotec.dll, Managed: True
Neurotec.LicenseManager.dll, Managed: True
Neurotec.Licensing.dll, Managed: True
ActivationWizardDotNet.log
ActivationWizardDotNetTrial.exe
ActivationWizardDotNetTrial.Settings.xml
pg.exe
pgd.conf
===============================================
============ FPSmm Information ============
FPScannerManCom:
Location: C:\WINDOWS\system32\FPScannerManCom.dll
FPScannerMan.dll present: True
FPSmm folder present: False
FPSmm folder near Activation folder:
Contents of additional folder:
FPSmmAuthenTec2501.dll
FPSmmNitgen.dll
FPSmmSecuGenHFDU02.dll
FPSmmSecuGenHFDU03.dll
FPSmmSecuGenHFDU04.dll
FPSmmTSTBIRD.dll
ATSC63.dll
BVLSAPI.dll
BVLSInfo.ini
CaptureSDK.dll
CertisExports.dll
cmtfinger.dll
DaktyImage.dll
DermalogCalibrateSDK.dll
DermalogLoggingFacility.dll
DermalogPLS1.cfg
DermalogPLS1.dll
DermalogVC3.dll
FingerChip.dll
FingerPrinterDll.dll
fm200api.dll
fm200drv.dll
fpd.dll
fpdusb.dll
FPSmmAtmel.dll
FPSmmAuthentec.dll
FPSmmBiometrika.dll
FPSmmCertis.dll
FPSmmCrossMatch.dll
FPSmmCyte.dll
FPSmmDactyScan.dll
FPSmmDaktyFpd.dll
FPSmmDermalogZF1.dll
FPSmmDigent.dll
FPSmmFM200.dll
FPSmmFujitsu.dll
FPSmmFutronic.dll
FPSmmFutronicEthernetFam.dll
FPSmmHongda.dll
FPSmmIdentixR.dll
FPSmmJstac.dll
FPSmmLighTunning.dll
FPSmmLScanEssentials.dll
FPSmmLumidigm.dll
FPSmmRealScan.dll
FPSmmSuprema.dll
FPSmmSupremaSFR300R.dll
FPSmmTacoma.dll
FPSmmUareU.dll
FPSmmUpek.dll
FPSmmZKSensor6000.dll
FSM26U.dll
ftrScanAPI.dll
futronic.cfg
fx3.dll
fx3scan.dll
GetImageC500.dll
Id3BiokeyDll.dll
Itf32_2080U2.dll
IZZIX.dll
libusb0.dll
LS1394.dll
LScanEssentials.dll
LScanEssentials.ini
LS_DeviceMonitor.dll
LS_USB_Stub.dll
LS_USB_Stub_100.dll
LS_USB_Stub_Us.dll
LumiAPI.dll
LumiCore.dll
MSVCP71.DLL
NBioBSP.dll
RS_SDK.dll
Segmentation.dll
SmzCmos1.dll
SMZ_API.dll
TSTBasic.dll
UFScannerC.dll
WisCmos2.dll
WIS_API.dll
ZFScanAPI.dll
Directories in FPSmm folder:
Additional
plugin
SPM
============================================
============ Log Information ============
2009-08-25 09:14:19 – Proxy address is not valid!
2009-08-25 09:14:26 – Proxy address is not valid!
2009-08-25 09:14:45 – Proxy address is not valid!
2009-08-25 09:14:57 – Proxy address is not valid!
2009-08-25 09:15:03 – Proxy address is not valid!
2009-08-25 09:15:55 – Proxy address is not valid!
2009-08-25 09:16:15 – Proxy address is not valid!
2009-08-25 09:16:21 – Proxy address is not valid!
2009-08-25 09:16:38 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:16:50 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:17:19 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:19:38 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:20:10 – Proxy address is not valid!
2009-08-25 09:20:56 – Port is wrongly specified. Please specify it and retry.
2009-08-25 09:21:01 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:21:36 – Proxy address is not valid!
2009-08-25 09:21:48 – Proxy address is not valid!
2009-08-25 09:21:54 – Proxy address is not valid!
2009-08-25 09:22:07 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:22:43 – Proxy address is not valid!
2009-08-25 09:22:46 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:23:10 – Proxy address is not valid!
2009-08-25 09:23:16 – Proxy address is not valid!
2009-08-25 09:23:29 – Proxy address is not valid!
2009-08-25 09:23:40 – Proxy address is not valid!
2009-08-25 09:23:46 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:24:03 – Proxy address is not valid!
2009-08-25 09:24:13 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:24:51 – Proxy address is not valid!
2009-08-25 09:34:23 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:37:09 – Diagnostics generation started.
2009-08-25 09:40:09 – Diagnostics was generated.
2009-08-25 09:46:10 – In order to apply the changes, please restart the Neurotechnology service!
2009-08-25 09:46:13 – Diagnostics generation started.
2009-08-25 09:47:30 – Diagnostics was generated.
2009-08-25 10:37:07 – Diagnostics generation started.
2009-08-25 10:38:29 – Diagnostics was generated.
==========================================
Code = -200
ManagedStackTrace = " σε Neurotec.NResult.RaiseError(Int32 error)"
σε Neurotec.NResult.Check(Int32 result)
σε(Neurotec.DeviceManager.Camera.StartCapturing())
σε Neurotec.Samples.MainForm.GetFrames() στο C:\Program Files\Neurotechnology\VeriLook 3.3\samples\VB\Faces\FacesSampleVB\Forms\MainForm.vb:γραμμή 639
σε System.Threading.ThreadHelper.ThreadStart_Context(Object state)
σε System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
σε System.Threading.ThreadHelper.ThreadStart()"
Message = "One of Neurotec modules is not activated. Code: -200"
Source = "Neurotec"
UnmanagedStackTrace = ""
StackTrace:
σε Neurotec.NResult.RaiseError(Int32 error)
σε Neurotec.NResult.Check(Int32 result)
σε(Neurotec.DeviceManager.Camera.StartCapturing())
σε Neurotec.Samples.MainForm.GetFrames() στο C:\Program Files\Neurotechnology\VeriLook 3.3\samples\VB\Faces\FacesSampleVB\Forms\MainForm.vb:γραμμή 639
σε System.Threading.ThreadHelper.ThreadStart_Context(Object state)
σε System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
σε(System.Threading.ThreadHelper.ThreadStart())
narva8916 wrote:Hi, i got a problem implementing add-on functionality, when i tried to save an image in .wsq format appears the next message:
"One of Neurotec modules is not activated. Code: -200"
i already install the BSS ADD-ON, in the activation Wizard application appears like "Activated"
hakanorskaya wrote:In this line of my code debugger waits for response,
- Code: Select all
bool available = NLicense.Obtain(Licenses.LicenseServer, Licenses.LicensePort, licenses[i]);
and after a while there comes a message box and says, "IO Error in one of Neurotec modules. Code: -14".
What is its meaning? How can i solve that? I am sure that C:\Program Files\Neurotechnology\VeriLook 3.3\bin\Win32_x86\Activation\ActivationWizardDotNetTrial.exe is running.
gmlogic wrote:I get following exception.
Neurotec.NotActivatedException was unhandled
...
Can you please help to sort out this issue?
ActivationWizard is running
gnikeht wrote:I've been trying to setup my clusters using linux with no success, I created a .LIC file for the computer I want to run the node on using the id.gen program, when I run the run_pgd.sh I get the following:
run_pgd.sh: starting pgd...
according to the script then I should get the log, but I get no log. the LOG variable in the script is set to a valid path.
my pgd.conf looks like this:
Mode = single
LicenseType=SingleComputerLicense
LicenceFile = blade1.lic
I've monitored the process and it starts but then it finishes...
Any help will be appreciated...
Rey
gnikeht wrote:I have that on MM3.0, but I need to run this on 2.1...will the 3.0 work on 2.1?
gnikeht wrote:I tried using the MM3 script but it's only for 64 bits.
qilisiang wrote:Hi,
currently I using Verifinger 6.1 SDK. I try to detect the fingerprint device, U.Are.U 4500, but this error occur when I tried to start capture, "One of Neurotec modules is not activated. Code: -200".
Thanks.
qilisiang wrote:May I know where is the activation wizard??
I can run the sample without any problem, but when I tried to run my own coded program, has the error as stated.
Thanks.
I can run the sample without any problem, but when I tried to run my own coded program, has the error as stated.
General info:
OS Version: Microsoft® Windows Vista™ Home Basic . Version 6.0 (Build 6001). Service Pack 1
ActivationWizard location: C:\Windows\system32\Activation
VeriFingerLicenceFile: size: 642 file: C:\Program Files\Spinalogic\license.lic
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
Selected license model: Single
Running pgs:
C:\Windows\system32\Activation\pg.exe, Created: 22/03/2007 3:37:08 AM
Config:
VeriFingerLicenceFile = C:\Program Files\Spinalogic\license.lic
Mode = single
Port = 5000
Address = 0.0.0.0
pgd.log file:
Starting PG (revision: 14692)
PG started.
Installed runtimes:
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.1434_none_d08b6002442c891f
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.1801_none_d088a2ec442ef17b
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.3053_none_d08d7bba442a9b36
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.312_none_10b2ee7b9bffc2c7
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.42_none_db5f52fb98cb24ad
x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb8f8
Component info:
Microsoft .NET Framework: Ver 2.0.50727.3074
ActivationWizardDotNet: Ver 1.1.0.0, Created: 25/09/2009 4:03:25 PM
Neurotec.NCore: NCore.dll
Neurotec.Images.NImages: NImages.dll
Neurotec.Biometrics.FPScannerMan: FPScannerMan.dll
Neurotec.Biometrics.VFExtractor: VFExtractor.dll
Neurotec.Biometrics.VFMatcher: VFMatcher.dll
Neurotec.Biometrics.NFRecord: NFRecord.dll
Neurotechnologija Fingerprint View Control 1.2.NET: Ver 1.2.0.0, Created: 29/05/2007 8:45:34 AM
FPScannerManCom: Not installed.
Path: C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Windows\system32\FPSmm;C:\Program Files\Neurotechnologija\VeriFinger 5.0\bin;C:\Program Files\Neurotechnologija\VeriFinger 5.0\bin\FPSmm
spinalogic wrote:Hi,
I'm having problems registering a Digital Persona finger scanner on a computer. I'm using Verifinger 5.
I select "Single Computer License"
Enter in the serial number
Click Generate
Windows pops up an error stating "id_gen.exe has stopped working"
Click ok
The verifinger activation wizard displays an error message "Failed to generate ID. Please check if you entered serial number correctly"
I've tried different serial numbers and the response is always the same.
Below is the diagnostics information
...
Martynas wrote:Hello,
are you logged as Administrator, when trying to use the Activation Wizard?
spinalogic wrote:Hi,
I'm logged in as a user with administrator rights but not the actual "Administrator".
Also, not sure if it's worth mentioning but the operating system is Vista Home Basic.
Martynas wrote:Is it possible to log on with actual Administrator rights? Vista OS name can be seen in first line of diagnostic.
Users browsing this forum: No registered users and 5 guests